Countertops & custom cabinets — one shop, one crew, one number(505) 203-5508
SERVICE AREA

Countertops & Cabinets in Moriarty, NM

Out into the Estancia Valley — a short run east on I-40 from our shop.

  • 4.0 ★ Google
  • Owner on every job
  • Own fabrication shop
  • Free on-site estimates
QUICK ANSWER

JYJ FLIPS LLC fabricates and installs granite, quartz, marble, and quartzite countertops and builds custom cabinets for Moriarty, NM, from our shop at 2369 Old Hwy 66, Edgewood. Moriarty is fifteen minutes east of the shop on I-40. Owner Jesus measures, builds, and installs. Granite $55–$95 per sq ft installed, quartz $65–$120 per sq ft installed, custom cabinets $350–$900 per linear ft installed, refacing $150–$350 per linear ft installed.

Area
Moriarty, NM · East Mountains
Travel charge
None
Rating
4.0 ★ on Google
Phone
(505) 203-5508
Estimates
Free, on-site, written quote from the owner

A short run east

Moriarty sits east of us on I-40 in the Estancia Valley, and it is an easy, regular trip from our Edgewood shop. Free estimates, no travel charge, and a crew that is not treating the drive as a burden to be priced in.

Practical kitchens for working properties

The valley is ranching and farming country, and the properties reflect that — larger parcels, outbuildings, shops, and houses that get used hard. The kitchens we build out here tend to prioritize durability and genuine storage over delicate finishes, and that is a spec we are happy to build to. Deep drawers that hold real weight, plywood boxes that survive decades, surfaces that shrug off actual cooking rather than staged photography.

We also build a fair amount of non-kitchen cabinetry in Moriarty — shop storage, utility rooms, mudrooms, and work surfaces for outbuildings. It is a different and generally more affordable spec than kitchen cabinetry, and it is work we genuinely enjoy.

Hard water is the local variable

Well water with heavy mineral content is common throughout the valley, and it drives our material recommendations more than anything else out here. Mineral spotting shows dramatically on dark polished stone and barely at all on a lighter, patterned surface. Non-porous quartz cleans up the most easily of anything we install. Granite performs well too, provided the sealer is kept current so minerals sit on the surface. When you call, mention that you are on a well — it genuinely changes the shortlist.

What we do in Moriarty

  • Granite Countertops — natural stone laid out on your actual slab, sealed at install.
  • Quartz Countertops — engineered, non-porous, never sealed — the zero-maintenance choice.
  • Marble Countertops — vanities, surrounds, and baking stations, with honest guidance on etching.
  • Countertop Replacement — tear out tile, laminate, or dated stone and install new tops in days, not weeks.
  • Custom Cabinets — built to your walls in our Edgewood shop, not ordered in three-inch increments.
  • Cabinet Refacing — new doors, drawer fronts, and veneer on boxes that are still sound.
  • Kitchen Remodeling — cabinets and countertops from one crew, on one schedule.
  • Bathroom Remodeling — custom vanities and stone tops built to the space you actually have.
  • Commercial & Hospitality — hotel vanities, reception desks, break rooms, and multi-unit cabinet packages.

Choosing a countertop material in Moriarty

Most people arrive with a material already in mind. We will fabricate whatever you choose, but we are also going to tell you where each one struggles, because the climate here is not neutral. Moriarty is flat and open with unbroken south and west exposure. Estancia Valley water is among the hardest we see; it changes the recommendation.

  • Granite — $55–$95 per sq ft installed. Igneous stone, every slab unique, indifferent to heat and sun. Needs sealing every one to three years. The default recommendation for sunrooms, outdoor bars, and anyone who cooks hard.
  • Quartz — $65–$120 per sq ft installed. Engineered, non-porous, never sealed, consistent from sample to slab. The default for busy family kitchens and for anyone who will not think about maintenance. Keep it out of direct all-day sun.
  • Marble — $75–$150 per sq ft installed. The most beautiful stone we cut and the softest. Perfect for vanities, fireplace surrounds, and a baking station. Etches from acids in a working kitchen, and we will say so.
  • Quartzite — $85–$160 per sq ft installed. Natural stone that reads like marble and wears like granite. The answer when someone wants a white veined top in a kitchen that actually gets used.

Every one of those is templated, cut, and polished in our shop at 2369 Old Hwy 66, Edgewood, NM 87015, which is why we can hold a seam tight and keep an overhang even. You can see the full breakdown on our pricing guide.

How we build cabinets for Moriarty homes

Custom does not mean expensive for its own sake. It means the box is built to the wall you actually have, in the increment you actually need, rather than the closest three-inch stock size plus a filler strip. In a region where very few walls are square and ceiling heights change room to room, that is usually the difference between a kitchen that looks fitted and one that looks installed.

  • Boxes. Three-quarter-inch plywood, not particleboard. Particleboard that has met water once — a slow dishwasher leak, a sink trap drip — swells and never recovers. Plywood survives it.
  • Doors and drawer fronts. Shaker, flat-slab, raised panel, or inset. Paint-grade maple or poplar, stain-grade alder, hickory, oak, or walnut. Knotty alder is the regional favorite for a reason: it takes a warm stain and hides the dings of a real household.
  • Hardware. Soft-close hinges and full-extension undermount drawer slides as standard. Not an upgrade.
  • Finish. Sprayed in the shop, not brushed on site. Conversion varnish over stain, or a catalyzed enamel over paint. It is the difference between a finish that holds up to fifteen years of hands and one that chips at the pulls in two.
  • Layout. Drawers where you reach down, doors where you reach up. Pull-outs for trash and spices. A pantry that uses the full height of the wall. This is the part that makes a kitchen work, and it is the part a catalog cannot do.

Typical installed pricing runs $350–$900 per linear ft installed depending on wood species, door style, and how much of the run is drawers. Full details on custom cabinets →

Why hiring one shop for cabinets and countertops matters in Moriarty

Most remodels in Moriarty involve two companies who have never met: one sets cabinets, another fabricates stone. When the countertop does not sit flat, each explains why it is the other’s fault, and you are left holding a gap, a tube of caulk, and two phone numbers.

We run both sides under one roof. Cabinets are set and leveled by our crew, then the countertop is templated against those cabinets, cut in the same building, and installed by the same people. If something is off, it is ours, and there is nobody to point at. That is not a slogan. It is the reason the business is structured this way, and it is the reason the seams line up.

It also has a practical scheduling benefit. One contractor means one calendar, so cabinets and tops land in sequence instead of leaving your kitchen torn out for a week while a second company finds an opening.

How a project runs with us

  1. Call or send the form. Jesus answers, asks what you are trying to do, and books a time to come measure. Moriarty is fifteen minutes east of the shop on I-40.
  2. On-site measurement and a straight conversation. We look at the room, the plumbing, the walls, and how you cook. If a material is wrong for your situation, this is where we say so.
  3. One written number. Template, fabrication, tear-out, install, haul-away, sealing. No per-item surprises after the fact.
  4. Slab or sample approval. For natural stone you see the actual slab and where the cuts land. For cabinets you approve a door sample and a finish chip.
  5. Fabrication in Edgewood. Cabinets built and finished in the shop. Countertops laser-templated once the cabinets are set and level, then cut on the CNC and polished.
  6. Install by the same crew. The people who measured are the people who build and the people who install. One point of contact from first visit to final walkthrough.

Countertop-only projects typically run one to two weeks from template to install. Full cabinet packages run four to eight weeks depending on wood and finish. A complete kitchen remodel is usually six to ten weeks once materials are approved.

Typical installed pricing in Moriarty

ServiceTypical rangeUnit
Granite countertops$55 – $95sq ft installed
Quartz countertops$65 – $120sq ft installed
Custom cabinets$350 – $900linear ft installed
Cabinet refacing$150 – $350linear ft installed
Full kitchen remodel$25,000 – $75,000full remodel
Full bathroom remodel$12,000 – $40,000full remodel

Ranges include template, fabrication, standard edge, tear-out of existing tops, install, and sealing where applicable. Exotic slabs, waterfall edges, full-height backsplashes, and structural changes move a project toward the top of the range. Every job is quoted individually after an on-site measurement. See the full pricing guide →

What Moriarty homeowners say

We hold a 4.0-star rating on Google, and the reviews behind it come from the same towns we list on this site. Read them on our Google Business Profile, then ask us for the phone number of a recent customer near you. We would rather you hear it from a neighbor than from us.

Also serving the areas around Moriarty

Our shop in Edgewood puts the whole metro, the East Mountains, and the Santa Fe corridor within a normal working radius. There is no travel charge anywhere on this list.

Serving Moriarty — free estimates, no travel charge. (505) 203-5508
FAQ

Moriarty Questions

Is Moriarty too far out for you?

Not at all — it is a short run east on I-40 from our Edgewood shop, and we work in Moriarty and the Estancia Valley regularly. Free estimates and no travel charge.

We are on a well with very hard water. What countertop handles that best?

Hard water is the single most relevant material question out here. Heavy mineral content leaves visible spotting and buildup, and it shows most on dark polished surfaces. A non-porous quartz wipes clean most easily. If you want natural stone, granite is a good choice as long as the sealer is maintained, so minerals sit on the surface instead of soaking in — and a lighter or more patterned stone hides spotting far better than a solid black polish. Tell us you are on a well and we will factor it into what we show you.

Can you build cabinets for a shop, barn, or utility space?

Yes. Plenty of Moriarty properties have a shop or outbuilding that needs real storage, and we build durable plywood cabinetry and heavy work-surface tops for exactly that. It is a different spec than a kitchen and usually a good deal more affordable.

GET STARTED

Request Your Free Quote

Call or text(505) 203-5508 Email[email protected]
Shop2369 Old Hwy 66, Edgewood, NM 87015
HoursMonday – Friday, 8:00 a.m. – 5:00 p.m.

Prefer to talk? Call or text (505) 203-5508. Response within one business day.

✓ Sent! Jesus will be in touch.
Free Quote